Introduction to Fish Pond Anti-seepage Membrane

The fish pond anti-seepage membrane has a better welding effect when using a hot-melt double-track welding machine. Some people also use special glue for geotextile membrane to bond for cost savings. The above article mainly introduced welding construction. Now let's introduce the bonding of fish pond anti-seepage membrane.

Bonding Precautions in Different Temperatures

1. Determine the thickness of the geotextile membrane glue according to the local temperature. In summer when the temperature is relatively high, a layer can be brushed on with a brush and then the overlapping surfaces can be quickly overlapped. Of course, before brushing the glue, the parts to be overlapped must be wiped clean. If not wiped clean, leakage may occur and affect the anti-seepage effect.
2. When constructing in low temperatures, the glue should be melted and applied thicker with an appropriate widening of the width. Use the heat of the glue to bond quickly, and the effect will be better.

Selection of Geomembrane Glue

3. At present, more electrically heated geotextile membrane glues are used, and the models are also of various qualities. It is necessary to purchase high-quality geotextile membrane glue. The cheap ones cost more than one hundred yuan, and the expensive ones cost more than three hundred yuan. As the saying goes, you get what you pay for. Do not be greedy for cheap and buy geotextile membrane glue with low adhesion.